Harrison Motorsports Aluminum Door Panel for Coupe or Convertible
2 door E36 BMW, not Ti or Sedan
This is for one aluminum panel. If you would like a pair, please order a quantity of two.
Made from long lasting aluminum, not cheap plastic. Will not crack or shatter under stress. Now shipping with a beautiful brushed finish.
Same panel fits both driver and passenger door. Totally customizable if you want to apply a finish to the panel. Paint, powdercoat, fabric, your choice.
Panel attaches to the frame of the door when the OEM door card is removed. They are not inset, but mount flat to the door.
Panel is completely flat, fitting over the window motor and regulator in the door so power windows remain operative.
The other advantage of flat, these panels leave elbow room for quick steering imputs. No banging your elbows on an armrest you never use.
Pre-cut to fit 1992-1999 BMW 3 Series Coupe and Convertible. Will not fit a 4-door Sedan.
COUPE and CONVERTIBLES ONLY! NOT FOR 4 DOOR Sedans or for the TI.
- Weight - 6.5 pounds per panel.
- Cut from 0.061 inch (1.56mm) thick aluminum sheets. Thick enough to be sturdy, but thin enough so they are still save 4 pounds over an OEM door card.
- You can leave the window motor and regulator in the door, they do not need to be removed. Windows remain operative.
- Cut out for door latch is completely ready.
- Knock-out for power mirror switch is cut.
- Panel is cut by a water jet, resulting in crisp clean edges.
- Hardware is not available, 17 6 x 7/16" self drilling screws per panel. You will need to purchase at your local harware store.
- 17 holes are pre-drilled at OEM attachment points for easy install on car door, use screws or pop rivets.
- Click on Attachment Tab above to download a document with installation tips.
Recommended for race and track use only. Not for use in vehicles with side air bags installed.
Add a Racetech Door Pull to your panel to have something to grap onto besides the window sill to shut your door!
https://www.harrisonmotorsports.com/racetech-door-pull.html
Quality Racetech door pull strap which mounts to a 11mm bolt hole. Made from plyable webbing. Approx 180mm (7") long and 25mm (1") wide. Available in red, or orange with embroidered Racetech logo.
