(678) 879-1200
Call us Monday-Friday  8:30am-6pm EST
After hours vehicle drop-off and pick-up available

Harrison Motorsports Aluminum Door Panel for E36, Coupe or Convertible, not for Sedan or Ti

Short description:

HMS/E36 Door Panel

Made from long lasting aluminum, not cheap plastic.  Will not crack or shatter under stress.  Now shipping with a beautiful brushed finish.


Order a quantity of two to receive a pair.  Order one to receive a single panel.

HMS/E36 Door Panel

Harrison Motorsports Aluminum Door Panel for Coupe or Convertible

2 door E36 BMW, not Ti or Sedan

This is for one aluminum panel.  If you would like a pair, please order a quantity of two.

Made from long lasting aluminum, not cheap plastic.  Will not crack or shatter under stress.  Now shipping with a beautiful brushed finish.

Brushed Aluminum finish

Same panel fits both driver and passenger door.  Totally customizable if you want to apply a finish to the panel. Paint, powdercoat, fabric, your choice.

Panel attaches to the frame of the door when the OEM door card is removed.  They are not inset, but mount flat to the door.   Now shipping with the hardware needed to attach to the door, 17 

Panel is completely flat, fitting over the window motor and regulator in the door so power windows remain operative.

The other advantage of flat, these panels leave elbow room for quick steering imputs.  No banging your elbows on an armrest you never use.

Pre-cut to fit 1992-1999 BMW 3 Series Coupe and Convertible. Will not fit a 4-door Sedan.


  • Weight - 6.5 pounds per panel.
  • Cut from 0.061 inch (1.56mm) thick aluminum sheets. Thick enough to be sturdy, but thin enough so they are still save 4 pounds over an OEM door card.
  • You can leave the window motor and regulator in the door, they do not need to be removed.  Windows remain operative.
  • Cut out for door latch is completely ready.
  • Knock-out for power mirror switch is cut.
  • Panel is cut by a water jet, resulting in crisp clean edges.
  • Hardware is now available, 17  6 x 7/16" self drilling screws per panel.  Select on checkout to receive them.
  • 17 holes are pre-drilled at OEM attachment points for easy install on car door, use screws or pop rivets.
  • Click on Attachment Tab above to download a document with installation tips.Knockout for mirror switch  

Recommended for race and track use only.  Not for use in vehicles with side air bags installed.

Add a Racetech Door Pull to your panel to have something to grap onto besides the window sill to shut your door!


 Quality Racetech door pull strap which mounts to a 11mm bolt hole. Made from plyable webbing. Approx 180mm (7") long and 25mm (1") wide. Available in red, black, blue or orange with embroidered Racetech logo.

Racetech door pull

Chassis Code :
  • E36 3 Series 1992-1999
  • E36 M3 1995-1999
Harrison Motorsports

Installation Tips (Installing_Aluminum_Door_Panels-HMS.docx, 1,414 Kb) [Download]