(678) 879-1200
Call us Monday-Friday  8:30am-6pm EST
After hours vehicle drop-off and pick-up available
   

HANS Sport 2 Head and Neck Restraint Devise

Free shipping within the USA on these genuine HANS Devices certified by SFI and FIA
$499.00
Short description:

HANS Sport

Most major race sanctioning bodies now requires SFI 38.1 or FIA 8858 approved head and neck restraint devices in all wheel-to-wheel racing events because they greatly reduce the risk of basal skull fractures and other serious head and neck injuries.

HANS Sport
This items usually ships in:

HANS Sport 2 Head and Neck Restraint Devise

Free shipping within the USA on these genuine HANS Devices certified by SFI and FIA

HANS Sport 2 is being phased out by HANS in favor of the HANS 3 Head and Neck Restraint  Only size Medium is still available in the HANS Sport 2.

The Hans Sport 2 Device offers all the same safety performance as the other Hans Devices, but features a rounded collar. The new design not only saves on weight, but allows for easier entry and exit in many smaller, tighter vehicles, and has a flatter profile for compatibility with any racing seat.

Constructed from an injection molded super structural carbon fiber, the Hans Sport II is available with a 20-degree layback, in Medium size. All Sport 2 models use the Sliding-style tether for great visibility (with no loss of protection).

Note: The width of the HANS Device is sized to fit your neck or shirt collar size comfortably. You may fit several sizes - comfort is the final deciding factor. 

SCCA, NASA, BMW CCA and most major race sanctioning bodies now requires SFI 38.1 or FIA 8858 approved head and neck restraint devices in all wheel-to-wheel racing events because they greatly reduce the risk of basal skull fractures and other serious head and neck injuries.

The HANS is the head and neck restraint that is most often trusted by professional racers.  HANS pioneered the field and still leads the pack in head and neck support devices.

Designed so you can forget you are wearing a head and neck restraint, a HANS Device lets you have a full range of vision on the tightest of tracks by utilizing sliding tethers.  

Impacts at speeds as low as 35 mph can cause a painful head or neck injury, possibly causing you to miss out on track time, (and work).  Neck injuries often require extensive physical therapy to regain movement and flexibility.  

Using a HANS Device can pay for itself in avoiding expensive co-payments to medical providers.

Choice of Anchors:   Quick Clips or Post Anchors  are offered for each HANS Device and can be used with either type of helmet, Snell SA or Snell SAH.

Quick Click HANS Anchors Quick Release Anchor Posts

 

Nutwasher installation

 

 

Snell SA helmets use an internal nutwasher which is slid inside the inner lining of the helmet, and oriented by using a thin tool to hold the nutwasher in place while installing the post anchor or Quick Click anchor.

Snell SAH helmets have a threaded insert (nutwasher) bonded directly inside the helmet shell.  So SAH helmets use an indexing collar and a tool is used to orient or index the post anchor from the outside of the helmet.

All HANS are available with you choice of teathers ending with Sliding Quick Click attachment points or with Post Anchor attachment points.

HANS Device Sizing Chart

Suggested Use:
  • Street or Mild Track Performance Upgrade
  • Race Level Performance Upgrade
  • Safety - Driver
Manufacturer:
HANS